Customization: | Available |
---|---|
Product Name: | Flap Type Two-Way Pull Rope Switch |
Model: | Hfklt2-II |
Still deciding? Get samples of US$ 60/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Overview:
Two-way pull rope switch is widely used in steel, cement, power plants, mines and other plants with belt conveyors, the product is installed on both sides of the tape conveyor, is used in the tape conveyor emergency stop a kind of protection switch, pull the wire rope at any point within the switch operating distance, cut off the operating circuit to stop the whole line, to achieve the protection of the tape machine and personal safety.
Working principle:
When an emergency occurs at the tape transport site, pull the wire rope tied to the lugs to make the slider in the machine work with the switch to signal a stop. Release the wire rope and press the reset bar to reset.
Structure characteristics:
The switch is made of high quality travel switch, with long use mission.
Good sealing, with the advantages of dustproof, shockproof, anti-corrosion, etc.
The housing adopts cast aluminum casting, light weight and high hardness.
Installation And Use:
The switch is balanced on the fixed bracket of the frame; Tie the wire rope to the pull ring at the upper and lower ends of the pull rope switch, with the wire rope not exceeding 40 meters on each side (should be shortened to 25 meters when there is a slope). The pull rope pressure should be appropriate to ensure reliable reset of the switch. setting the pull rope along the parallel direction of the tape, adding a lifting ring every 3 meters.
Product Name | Pull rope switch | Model | HFKLT2-II / KLT2 |
Reset mode: | Manual and automatic reset | Environmental temperature | -30ºC--- +60ºC |
Relative Humidity | less than 85% | No. of contacts | 1NO1NC /2NO2NC |
Action Angle | 30° | Action force | 10kg |
Limit Angle | 60° | Current | 1.5A |
Reliability | >106 times | Contact capacity | AC380V /DC220V |
Zhejiang Weikesen Power Technology Co., Ltd. was established 15 years ago with a capital of 1 million euros. Is a professional sales of AC contactor, pull wire switch product design concept is based on market demand manufacturing products. The products have been loved by various industries throughout the country Through our continuous improvement of good quality and good market honor, we have won the unanimous praise of the market and a large number of foreign importers' favor and recognition.